“Connected, no internet access”: what to check on a computer

The network icon is there, Wi-Fi is “connected”, and pages do not open: Windows says “Connected, no internet access” or “No internet connection”. That does not mean “no Wi-Fi”: it means the internet-access check failed. Below: how Windows runs that check per Microsoft’s documentation, what the most common signs mean and the order to check per Microsoft’s help.

In short. First try another device on the same network: if it has no internet either, the router or the provider is to blame; if it has, the computer is. Then, per Microsoft’s help: turn Wi-Fi off and on, restart the router and modem (unplug for about 30 seconds), run ipconfig /release, ipconfig /renew and ipconfig /flushdns as administrator, turn off a manually set proxy, check that the address is not 169.254.x.x. “Network reset” is the last step: afterwards you may have to reinstall VPN software.

We make Mayak — a private network. Our own app is for Android, and for Windows we provide a subscription link for Happ. This article is about the network on a computer; Mayak cannot replace a network that is not there.

How Windows decides there is no internet

Windows does not “know” about the internet by itself; it checks. By Microsoft’s documentation, this is done by the Network Connectivity Status Indicator (NCSI): it sends an HTTP request to a probe server. Starting with Windows 10 version 1607 that is www.msftconnecttest.com/connecttest.txt, and the expected reply is the text “Microsoft Connect Test”. The reply came: Windows considers the internet available. The request did not get through or the reply was different: the icon says “no internet access”.

If a sign-in page came back instead of the expected file (a redirect or an empty reply), Windows decides you are behind a sign-in page of the network. That is why in a café or airport a browser may open by itself when you connect: Microsoft says this is by design.

What can get in the way of the check, per Microsoft’s list: a proxy; a VPN setup and misrouting of the probe; a DNS failure while looking up the probe servers; a sign-in page. Microsoft also writes that the icon can be wrong: if Office says “no internet” while websites open, that is a question for the indicator, not the network. Trust what actually opens.

One more detail from the same documentation: the active check runs separately over IPv4 and IPv6, and if either passes, Windows considers the internet available.

What you see and what it means

What you seeWhat it meansWhere to startSource
The network icon says “No Internet” while Wi-Fi is connected The device is not connected to the internet although it joined the network: the internet-access check failed Another device on the same network; the steps below Microsoft’s Wi-Fi help; the NCSI documentation
A Wi-Fi icon with a small blue shield Windows recognised a connected VPN If there is no internet, turn the VPN off for a minute and compare Microsoft’s Wi-Fi help
An address like 169.254.x.x Windows did not get an address from the router Check whether address assignment (DHCP) is on in the router, restart the router Microsoft’s Wi-Fi help
The browser opened a sign-in page by itself By design: the network wants you to sign in, and the Windows check ran into the sign-in page Sign in on that page The NCSI documentation, its FAQ
“Unidentified network” or “Default gateway is not available” These messages are not in the Microsoft help we read; the nearest step in the help is to check whether the router answers Find the default gateway with ipconfig and ping it; restart the router The “Ping the router” step of Microsoft’s help

The messages “Unidentified network” and “Default gateway is not available” are searched for often (Wordstat, 21 November 2026, region 225, 30 days: 1,032 and 653 queries, an upper bound), but they are not in the Microsoft help we read. We do not know which of them belongs to which Windows version.

The order of checks per Microsoft’s help

Microsoft’s help on Wi-Fi problems in Windows (read on 21 November 2026) goes from the simple to the drastic. The commands are run in Command Prompt as administrator.

  1. Another device on the same network. If it has no internet either, the router or the provider is the likelier cause.
  2. Wi-Fi and airplane mode. Turn Wi-Fi off and on; check “Settings” → “Network & internet” → “Airplane mode”: it must be off.
  3. Router and modem. Unplug the router first, then the modem (if the lights stay on, take out the modem’s backup battery). Wait about 30 seconds, plug the modem in, wait for its lights to settle, then plug in the router and reconnect the computer. If you have a single combined device, restart that one.
  4. Does the router answer? Find the “Default gateway” with ipconfig and run ping with that address: replies mean the computer reaches the router.
  5. Resetting the address and the cache. ipconfig /release, ipconfig /renew, ipconfig /flushdns. These are in the help and in its list of drastic steps along with netsh winsock reset and netsh int ip reset.
  6. Proxy. “Settings” → “Network & internet” → “Proxy”: turn off a manually set proxy.
  7. DNS. ipconfig /all shows the DNS server address; ping it, and if there is no reply the help advises trying a different DNS server. More: “DNS and timeout errors in the browser”.
  8. Forget the network and reconnect: “Manage known networks” → your network → “Forget”, then enter the password again. If the router has two bands, try the other (2.4 or 5 GHz).
  9. Driver, power, updates. Reinstalling the adapter driver (back it up first), turning off power saving for the adapter, Windows updates, a restart.
  10. “Network reset” — at the very end. Microsoft calls it a last resort: afterwards you may have to reinstall VPN software, and networks may switch to the public profile.

Wi-Fi with a sign-in screen

On a public network, such as a café’s, sign-in may be requested through a portal page: Chrome’s help reminds of this too. Until you sign in, Windows shows “no internet access” — that is not a fault. Chrome’s help advises opening a site whose address starts with http:// for that: then the sign-in page can open. More on such networks: “Public Wi-Fi: what the hotspot owner sees”, and on a VPN with a sign-in page: “VPN connects but there is no internet”.

If a VPN is on on the computer

Microsoft’s documentation says that VPNs and third-party software can cause trouble: they can intercept, misroute or delay the Windows check. Among the reasons for a failed check Microsoft names the “no route” case: a VPN has just connected and has not yet changed the routing table, or the VPN forces all traffic through itself and the physical network is left looking local-only. So if the “no access” icon appeared after you turned a VPN on, turn it off for a minute and compare.

We have no measurements of our own on how exactly VPN clients on Windows affect this indicator: we did not check that.

The network is back but the page you need is not? Then check what a VPN does with it. Create an account, open “Connect by link” in the dashboard and add the link to Happ. We do not ask for payment details for the trial. 3 free days once you sign up with your email.

What happens next.

  1. Create an account in the dashboard: email and password, no card.
  2. Open “Connect by link” in the dashboard and add the link to Happ: how to do it on Windows is in “A VPN for Windows 10 and 11”.
  3. Press one button in Happ. If there is no internet even without a VPN, go back to the steps in this article first: a VPN will not help with that.

And on a phone

A phone has a similar check, but the steps are different: “No internet on your phone: what to check in five minutes”. If the phone has no cellular connection at all: “No Service” and “Mobile network not available”.

What we do not promise

  • That the steps from Microsoft’s help will bring your internet back: the cause is often the router or the provider, and we cannot see them.
  • That a VPN will help when there is no network: it travels over a network, it does not replace one.
  • That in your Windows version the items are named and placed as in the help: the Russian names are our translation of the English help.

What we checked

  • Microsoft’s documentation “Network Connectivity Status Indicator overview for Windows” and its FAQ (the probe address, the expected reply, the sign-in page, reasons for a failed check) — read on 21 November 2026.
  • Microsoft’s help “Fix Wi-Fi connection issues in Windows” (steps, commands, icons, “Network reset”) — 21 November 2026.
  • Chrome’s help “Fix connection and loading errors in Chrome” (a public network) and Chrome’s help on connection errors, support.google.com/chrome/answer/95669 (signing in through a portal page) — 21 November 2026.

What we do not know

  • What exactly is written in your Windows version and what the icon looks like: the wording used in searches (“Connected, no internet access”, “Unidentified network”) does not appear verbatim in the help we read.
  • What share of cases is the router, what share the provider and what share the computer: we have no such measurements.
  • How VPN clients on Windows behave with this indicator: we did not measure it.
  • We did not walk through the help steps on a live Windows computer.

Short answers

What does “Connected, no internet access” mean? The computer joined the network but the internet-access check failed. The cause may be the router, the provider, a proxy, DNS or a sign-in page on the network.

Why is Wi-Fi connected but there is no internet? Joining Wi-Fi and having internet are different things: Wi-Fi connects you to the router, and the router may have no way out to the internet. Try another device on the same network.

What does an address like 169.254.x.x mean? Microsoft’s help: Windows did not get an address from the router; check whether address assignment (DHCP) is on in it.

Can I trust the “no internet” icon? Not always: Microsoft writes that if an app says “no internet” while websites open, the indicator is at fault. Trust what opens.

What to do last? “Network reset”: Microsoft calls it a last resort, and afterwards you may have to reinstall VPN software.

Try Mayak

A secure connection for Android, and articles where other people’s words come with a publication and a date, and our own numbers come with a measurement. 3 days free, no card needed.

The account is created right in the app. 3 free days once you sign up with your email.