Router red light or no internet from the router: what to check

A red light on the router frightens most, and what it means depends on the manufacturer and the model. Below: what the help of TP-Link, ASUS and Keenetic says about the Internet light, the order in which to check a router, how to restart it per Microsoft’s help and when it comes to a reset.

In short. A red or dark Internet light is usually linked to the router not getting a connection from the provider, but the help pages we read do not say so: in TP-Link’s table of indicators red is not explained, so check your model’s manual. The order of checks: find out whether the internet is missing on all devices or on one; check the power and cables; switch the router and modem off and on in order (per Microsoft: unplug the router, then the modem, wait at least 30 seconds, plug the modem in first, wait until it stops blinking, then the router); connect a computer by cable; if there is no internet by cable, contact the provider. A factory reset is the last step: it also erases the settings for connecting to the provider.

We make Mayak, a private network with an Android app. The light on the router is about the link to the provider, not our product; for what to do when the light is green but the VPN will not connect, there are separate articles, linked below.

What a red light means

An honest answer: it depends on the manufacturer and the model, and help pages are silent more often than we would like. The table shows exactly what is written in the ones we read.

Help pageWhat it saysWhat it lacks
TP-Link, the help on LED indicators (for Wi-Fi 5 and Wi-Fi 6 models) The Internet light is two-colour. Solid green: an internet connection with no traffic; flashing green: traffic is passing; off: no internet connection or the device is in bridge mode. The light turns red for half a second at power-on What red means and what to do; orange is not mentioned. The help notes that LED layouts vary by model
TP-Link, the Russian-language knowledge-base article “What to do if the internet does not work?” (2021) Internet light off: move the provider’s cable to a LAN port; if it lights up, the WAN port is faulty, if not, there is no physical link to the provider. Orange: the cause may be in the router’s settings or at the provider. Green: check whether the internet works Red is not mentioned
ASUS, the help pages on internet connection errors and on the WAN light Check the power, the cables, that the lights are on or flashing; a direct connection of the computer, the provider’s settings, firmware, a reset The meanings of the light colours are not described
Keenetic, the help “What to do if you suspect that your device is faulty” A sign of a possible fault: no light is on, or the Status light is still flashing two minutes after power-on The meanings of the Internet light are not described (the page on buttons and indicators describes the reset button, not colours)

The table shows the main thing. In TP-Link’s help the Internet light describes the router’s link to the internet (present, absent, whether there is traffic), and “off” means there is no link. What red means on your model you have to look up in its manual: we found no single explanation. We did not read the help of provider-supplied routers (Rostelecom, Dom.ru and others): on many of them a red light may mean something of its own. Xiaomi’s help on this question refused our request with a 403.

The order of checks

1. Find out whether the internet is missing on all devices. Apple’s help advises checking whether other devices can join the network: if they can, “the router and network are working” and the problem is in the device. Microsoft’s help tells the icons apart: with the “No Internet” icon the device has no internet connection.

2. Power and cables. ASUS’s help: check that the router, modem and computer are connected, the power is on and the network cable is good; do not forget to press the power button; make sure the lights are on or flashing. TP-Link’s article: the provider’s cable goes into the WAN port (blue on theirs), the computer into a LAN port (yellow); if no light is on, check the adapter, the outlet and the plug. Keenetic advises using only the adapter from the box.

3. Restart the router and modem in order. Microsoft’s help (step 4): unplug the router from power, then the modem; wait at least 30 seconds; plug in the modem first and wait until it stops blinking; then plug in the router and wait a few minutes for both to power on fully. If the lights stay on after unplugging the modem, the help says to remove its battery. If you have a single combined device (modem and router together), the steps are for that one device. Everyone connected to your Wi-Fi will be disconnected for the time. Apple’s help says the same more briefly: unplug the router and the cable modem and plug them back in; Apple does not give the order or the pause.

4. Check by cable. Microsoft’s help (step 9): if Wi-Fi does not work, connect the computer to the modem by an Ethernet cable (if you can). ASUS’s help: connect the computer straight to the provider’s cable, without the router; if there is no internet that way either, contact the provider. One more check from Microsoft: find the default gateway and ping that address: if replies come, there may be a problem with the modem or the provider; if not, and everything works by cable, the problem is the Wi-Fi router.

5. The connection settings at the provider. ASUS’s help: ask the provider for the connection type (automatic IP, PPPoE or static IP) and check it in the router’s settings. TP-Link’s article: the login and password must match the contract strictly; ask whether the service is tied to a MAC address; if the WAN status shows the address 0.0.0.0, the router has not got a connection to the provider. How to open the router’s settings is in the article about 192.168.1.1.

6. Firmware. Both ASUS and Apple advise updating the router’s firmware.

7. Reset and service. If nothing helped, ASUS suggests resetting the router with the RESET button (hold for 5–10 seconds) and setting it up again through the quick internet setup; if that did not help either, contact the manufacturer’s service. Keenetic names as signs of a possible fault that no light is on or the Status light is still flashing two minutes after power-on.

Router fixed, but the VPN still will not connect? Then the cause is no longer the light: you can check in a minute, the app has a “Check connection” button. We do not ask for payment details for the trial. 3 days free once you sign up with your email.

What happens next.

  1. Create an account in the dashboard: an email and a password, no card needed.
  2. Install the app: from Google Play or as a file from our site. On the first connection Android shows a connection-request window: that is expected.
  3. Press one button and wait for “Protected”; if it did not connect, press “Check connection” and compare with the article on home internet.

If the light is green but the internet is not shared

Then the question is the link between the device and the router. ASUS’s help: if the internet works by cable but not over Wi-Fi, move on to checking Wi-Fi: change the network’s name and password and see whether devices find the network. Apple’s help: if the router works on two frequencies, try the other, for example 5 GHz instead of 2.4 GHz. Microsoft’s help: if Windows shows an address like 169.254.x.x, it did not get an address from the router; check whether address assignment (DHCP) is on.

If on a phone Wi-Fi is connected but there is no internet, the order of checks is in the article about no internet on a phone; on a computer, in the article “No internet access”; on a TV, in the article about a TV.

When to reset and what it erases

A reset is the last step, not the first. Per TP-Link’s help, it “erases all custom settings, including your Internet settings”, the Wi-Fi settings, port forwarding and parental controls and cannot be undone; afterwards the router returns to the address and login details from the bottom label, and you must set it up again. The button: on TP-Link more than ten seconds; on ASUS 5–10 seconds (the connection-errors help) or at least five seconds until the power light flashes (the login help); on Keenetic about 10–12 seconds. The practical conclusion is ours: before a reset, get the login, password and connection type from the provider, or after the reset there will be no internet. If a VPN was set up on the router (our article), you will have to set it up again.

The light is green but the VPN will not connect

That is a different trouble. Apple’s help for an iPhone that will not join Wi-Fi advises, among its steps, to uninstall VPN and security software, restart the device and test the network again. If the internet works without the VPN but not with it, see the article on a VPN over home Wi-Fi and the article “The VPN connects but there is no internet”.

What we do not promise

That a red light on your model means exactly a lost link to the provider: we found no explanation of red from the manufacturers. That a restart will cure a fault on the provider’s line. That the power-on order from Microsoft’s help suits routers you got from your provider: they may have their own rules.

What we checked

  • TP-Link’s help on indicators (the Internet light table), TP-Link’s Russian-language article “What to do if the internet does not work?” and its help on a reset: read on 21 November 2026.
  • ASUS’s help in Russian on internet connection errors through a router and in English on the WAN light: 21 November 2026.
  • Keenetic’s help on a faulty device and on buttons and indicators: 21 November 2026.
  • Microsoft’s help “Fix Wi-Fi connection issues in Windows” (steps 4 and 9, the 169.254.x.x address) and Apple’s help “If your iPhone or iPad won’t connect to a Wi-Fi network”: 21 November 2026.
  • Our articles on logging in to a router, a VPN on a router, a VPN over home Wi-Fi and “connected but no internet”.

What we do not know

  • What a red light means on your model: the help pages we read have no explanation of red.
  • How all this looks on a live router: we went through no step.
  • We did not read the help of Xiaomi (our request got a 403), D-Link, Tenda, Huawei and providers; the wording is translated from the English help pages.
  • How to restart a router from its settings page: we did not read help on this step.
  • How long a router takes to start after power-on: Microsoft’s help says “a few minutes”, and we found no exact figures.

Short answers

What does it mean if the router is red? There is no single explanation: in TP-Link’s table of indicators red is not described (an Internet light that is off means no internet connection or bridge mode); check your model’s manual.

How do I restart a router properly? Per Microsoft’s help: unplug the router, then the modem, wait at least 30 seconds, plug in the modem, wait until it stops blinking, then plug in the router.

What if the router does not share the internet? Check the power and cables, restart the router and modem, connect a computer by cable; if it works by cable but not over Wi-Fi, change the band (2.4 or 5 GHz) and check the Wi-Fi settings.

When should I reset the router? As the last step, when the cable check, the restart and a call to the provider did not help: a reset erases the internet settings, Wi-Fi and port forwarding.

Can a VPN make the light red? We did not test this and read nothing of the kind in the help pages; per TP-Link’s help the Internet light describes the router’s link to the internet.

Try Mayak

A secure connection for Android, and articles where other people’s words come with a publication and a date, and our own numbers come with a measurement. 3 days free, no card needed.

The account is created right in the app. 3 free days once you sign up with your email.