The TV cannot see Wi-Fi, sees it but will not connect, or connected and still says there is no internet. These are three different faults, and the help from Samsung, LG and Google starts with the same thing: find out whether the TV or the network is at fault. Below is the order of checks from that help, a table of signs and what the help leaves out.
In short. First check another device on the same network and connect the TV to a phone hotspot: that shows whether the TV or the router is at fault. Then per the help: unplug the modem, router and TV and plug them back in one by one, starting with whatever the internet comes from; check the password (it is case-sensitive); try the 2.4 GHz band if the network is on 5 GHz; on Samsung, run the network status check and, if needed, “Reset Network”. If the TV runs Android TV or Google TV and the network is fine, you can install Mayak on it; for Samsung and LG we have no app of our own.
We make Mayak, a private network. It installs on TVs and set-top boxes with Android TV and Google TV; for Samsung (Tizen) and LG (webOS) we have no app of our own. This article is about the network: until the TV is online, a VPN will not help it.
🍎 On iPhone Mayak works with the subscription link from your account. INCY was removed from the Russian App Store on 27 October 2026: if you already have it, it keeps working — do not delete it, it cannot be downloaded again from the Russian store right now. With a Russian Apple account, Clash Mi and Shadowrocket are available now (we have not verified them live with our link); Happ and INCY need an Apple account of another country.
First: is it the TV or the network
All three sets of help start here. Google’s help (for Chromecast and Google TV Streamer): if other devices also cannot connect to the network, the router is the likely cause; if they can, restart the router and wait for it to come fully back. LG’s help: check whether another device has internet, and if only the TV has a problem, turn on your smartphone’s mobile hotspot and connect the TV to it. Samsung’s help suggests the same: connect to a phone hotspot or another network; if it connects, contact your provider or router maker about the first network.
If no device has internet, Samsung’s help advises contacting your internet provider: there may be an outage. If only the TV has none, the order in this article follows.
A caveat about Google’s help: it was written for Chromecast and Google TV Streamer, not for TVs running Google TV. We take from it what applies to joining Wi-Fi in general, and say so.
What you see and where to start
| What you see | Where to start | Source |
|---|---|---|
| Your Wi-Fi is not in the list | A hidden network: add the name by hand. A signal of one or two bars: move closer to the router. Older models may not see 5 GHz. As a test, a hotspot on a phone | Samsung’s help; Google’s help for Chromecast and Google TV Streamer; LG’s help |
| The network is listed but will not connect | The password, case-sensitive; the network status check in the menu; “Reset Network”; undo router settings you changed | Samsung’s and LG’s help |
| Connected, but no internet | Another device on the same network; restart the modem and router; a sign-in page (not supported everywhere); a manual DNS if needed | Samsung’s and Google’s help |
| Connects, but the link is poor | Disconnect extra devices; forget the network and reconnect; move closer to the router | Samsung’s help |
| The wired connection does not work | The cable is firmly seated at both ends; replace it with a known-good one | LG’s and Samsung’s help |
Is the network back on the TV? If you have Android TV or Google TV, install Mayak and sign in with the code on the screen: the details and the list of suitable TVs are in the article about a VPN on a TV. We do not ask for payment details for the trial. 3 days free once you sign up with your email.
What happens next.
- Create an account on your phone or in the dashboard: an email and a password, no card needed.
- Install Mayak on the TV with Android TV or Google TV: how to check whether yours will do is in the article “A VPN on a TV: which TVs can and which cannot”.
- Open Mayak on the TV: it shows a QR code. Point your phone’s camera at it and the TV signs in to your account.
🍎 On iPhone Mayak works with the subscription link from your account. INCY was removed from the Russian App Store on 27 October 2026: if you already have it, it keeps working — do not delete it, it cannot be downloaded again from the Russian store right now. With a Russian Apple account, Clash Mi and Shadowrocket are available now (we have not verified them live with our link); Happ and INCY need an Apple account of another country.
The TV cannot see Wi-Fi
A hidden network. Samsung’s help: scroll to the bottom of the network list, choose “Add Network” and type the name by hand; if that fails, make the network visible while you connect and hide it again afterwards. Google’s help on a hidden name says the same: the name does not show during setup and you enter it manually.
A weak signal. Samsung’s help: if the screen shows one or two bars the signal may be too weak; move the router closer or add a repeater. Google’s help: the device works best within 20 feet of the router.
The 2.4 and 5 GHz bands. Samsung’s help: some 2018 models cannot detect or connect to a 5 GHz network; check your TV’s manual. Google’s help for dual-band routers advises turning off features such as Band Steering or Smart Connect (they move a device between bands on their own) and says the first-generation Chromecast works only on 2.4 GHz.
Too many devices. Samsung’s help suggests disconnecting other devices from Wi-Fi: if the TV then connects, the router may be overloaded or your plan may not give enough speed.
Restarting in order. Samsung’s help: unplug the router, modem and TV and plug them back in one by one, starting with the device the internet comes from. LG’s help: switch off both the modem and the router, plug the modem in first and the router a minute later; when the internet light on the equipment is on, connect the TV again. Google’s help: leave the router unplugged for two minutes.
If no network at all appears in the list and the phone hotspot is not visible either, Samsung’s help sends you to service; LG’s help, for an empty list or an unavailable “Wi-Fi” item, also suggests contacting support (this comes from the search results; we did not read the text of that page).
It sees the network but will not connect
The password. Samsung’s and LG’s help: the password is case-sensitive. Samsung’s help advises showing the password, trying it on another device and looking for the default password on the underside of the router.
The network status check. Samsung’s help: “Settings” → “Connection” → “Network” → “Network Status” (on some models the path starts under “General”); note the error message. If it says the password is wrong, see above. If it is a MAC address error, the help advises a factory reset of the TV and, if the error returns, service.
You changed router settings. Samsung’s help: if the TV connected before and stopped after a router settings change, that change is the likely cause and should be undone. Which settings depends on the router and we do not describe them.
Reset the network and forget the network. Samsung’s help: “Settings” → “Connection” → “Network” → “Reset Network”, then connect again. If the TV connects but the link is poor, the help suggests deleting the saved network (“Manage Saved Networks” → “Delete”) and connecting afresh. Menu names are as the English help gives them; yours may differ.
On LG. LG’s help for webOS 6.0 and later: “All Settings” → “General” → “Network” → “Internet Connection” → “Wi-Fi Connection”. Older TVs have other paths, listed by year in the help itself. The causes it names: the router or modem is off, a wrong password or weak signal, a temporary IP assignment error, a fault in the TV’s Wi-Fi module, an outage at the provider.
Connected, but no internet
Start with the same thing: does another device have internet. If nobody does, the router, the modem or the provider is at fault; the general order of checking the router is in the article about home internet, and for the same message on a computer see “Connected, no internet access”.
A manual DNS. Samsung’s help has this step: “Network Status” → “IP Settings” → “DNS Setting” → “Enter Manually” and set the DNS server to 8.8.8.8. It is a step from the maker’s help, not our advice: what DNS is and how it can get in the way is in the article “What is DNS”.
A sign-in page. Google’s help: Google streaming devices do not support networks that require signing in through a page (hotels, schools, dorms, offices). Samsung’s and LG’s help we read say nothing about such networks.
Client isolation. Google’s help: “AP isolation” (also called “Client Isolation” or “Guest Mode”) may be on in the router (and in an extender); the help advises turning it off. How to do that depends on your router.
A software update. Samsung’s help describes updating the TV’s software from a USB drive: “Settings” → “Support” → “Software Update”. Whether that helps in your case, we do not know.
LG’s network status screen, where icons show which link is broken, is not described in the LG help we read: it came up in search results, but we did not see the page’s text.
A VPN and the TV: the network first
If a VPN is on in the router, the set-top box or the TV and the network is not working, turn it off for a minute and compare: this is an order of checks for separating the network from the VPN, not a conclusion from the help. The Samsung, LG and Google help we read does not mention VPNs.
What is ours: Mayak installs on TVs and set-top boxes with Android TV and Google TV; for Samsung on Tizen and LG on webOS there is no Mayak app, they need an Android set-top box (as written in the article about a VPN on a TV). If only video does not open on the TV and the network is fine, the cause may be something else: see the article about YouTube on a TV. About “apps will not open” on a working network the Samsung, LG and Google help say nothing, and we invent nothing here.
What we do not promise
That your model and year have the same menu items: the help gives paths by version, and we translate them without checking on a TV. That the TV will connect after any step on the list. That our VPN will fix a network that is not there.
What we checked
- Samsung’s help “Samsung TV will not find or connect to my Wi-Fi network” (the network not visible, not connecting, a poor link; the status check, network reset, a manual DNS) — read on 21 November 2026.
- LG’s help “If You Experience Network Issues on Your LG TV” (a phone hotspot, restarting the modem and router, paths by year, causes) — 21 November 2026.
- Google’s help “Can’t connect Chromecast or Google TV Streamer to Wi-Fi” (other devices, a hidden network, bands, AP isolation, a sign-in page) — 21 November 2026.
- Our article “A VPN on a TV: which TVs can and which cannot”.
What we do not know
- How all this works on a live TV: we did not go through a single step.
- What the menu looks like on a particular model and year, on Hisense, TCL, Xiaomi, Yandex TV and others: we read no help from those makers.
- What LG’s network status screen does: we did not read the page about it.
- Sony’s help for Android TV and Google TV refused our request (error 403), so it is not in the article.
- Why apps will not open on a working network: the help we read says nothing about it.
Short answers
Why won’t my TV connect to the internet? The cause may be the TV, the router or the provider. Check another device on the same network and connect the TV to a phone hotspot.
Why can’t my TV see Wi-Fi? The network may be hidden, the signal weak, or the network on 5 GHz, which some older models cannot see. Restart the modem, the router and the TV in order.
What does “connected, but no internet” mean on a TV? The TV joined the router but has no way out to the internet: the router, the modem, the provider, DNS or a sign-in page.
Can I put a VPN on a Samsung or LG TV? There is no Mayak app for them; our apps are for Android TV and Google TV.